TECHNICAL DATA
CAPRAN^® 512 Bagging Film
Heat Stabilized Nylon Film

DESCRIPTION
CAPRAN^® 512 is a clear (moderate haze level), heat-stabilized, modified nylon film engineered as a vacuum bagging film.

APPLICATION
CAPRAN^® 512 is recommended as a bagging film for advanced composite fabrication, adhesive bonding and other high-temperature / pressure applications where softness, workability, pinhole-free and defect-free films are essential. CAPRAN^® 512 is suitable for cure cycles up to 400°F (205°C).

CAPRAN^® 512 can be heat seamed to meet any custom shape requirements.

MECHANICAL PROPERTIES TYPICAL VALUES
Tensile strength: > 12,000 PSI 844 kg/cm²
Elongation: > 320%
Tensile modulus: <90,000 PSI

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 205
Melt Point (DSC): 424 / 218

CAPRAN^® 512 is available in standard thickness of .002 (.051mm) and .003" (.076mm) in a wide variety of sizes in lay-flat tubing, v-sheeting (centerfold) and sheeting

Call to confirm availability.

Storage and Handling: Recommended use and storage of this product is in RELATIVE humidity environment of 55%
OR HIGHER.
VAC-PAK® is a Registered Trademark of Richmond Aircraft Products Inc.
Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.