TECHNICAL DATA
CAPRAN^® 980 Bagging Film
Heat stabilized Nylon Film

DESCRIPTION
CAPRAN^® 980 is a clear (low haze level), heat-stabilized, cast film produced from a modified nylon resin.

APPLICATION
CAPRAN^® 980 is a cast film recommended as a bagging film for advanced composite fabrication, transparency laminating and other high-temperature applications where dimensional stability and uniform film gauge are essential. In addition, CAPRAN^® 980 has excellent heat stability and resistance to pinholing. CAPRAN^® 980 can be used in cure cycles up to 400°F (205°C). CAPRAN^® 980 can be heat seamed to meet any custom shape requirements.

MECHANICAL PROPERTIES TYPICAL VALUES
Tensile strength: > 15,000 PSI 1055 kg/cm²
Elongation: > 320%
Tensile modulus: <90,500 PSI

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 205
Melt Point (DSC): 424 / 218

CAPRAN^® 980 is available in sheeting only at .002" (.051mm), .003" (.076mm), .004" (.10mm) and .005" (.12mm) thicknesses and widths to 88" (2.2m).

Call for availability.

Storage and Handling: Recommended use and storage of this product is in RELATIVE humidity environment of 55% OR HIGHER.
VAC-PAK® is a Registered Trademark of Richmond Aircraft Products Inc.
Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.