TECHNICAL DATA
DBR-6 Bagging Film
For Debulk and Compaction Operations

DESCRIPTION
DBR-6 is a .006" (.15mm) thick, clear LDPE film suitable for direct contact compaction applications.

APPLICATION
DBR-6 is an excellent selection for low temperature debulking and compaction cycles up to 120°F (49°C). DBR-6 can be heat seamed to meet any custom shape requirements. DBR-6 releases cleanly after compaction cycles and may be used in direct contact with the composite surface.

MECHANICAL PROPERTIES TYPICAL VALUES
Tensile strength: > 1,200 PSI 84 kg/cm²
Elongation: > 350 %

THERMAL PROPERTIES °F / °C
Maximum use temperature: 120 / 66
Melt Point (DSC): 207 / 96

DBR-6 is available as sheeting in standard roll sizes at:

.006" x 36" x 350' .15mm x .9m x 106.6m
.006" x 54" x 350' .15mm x 1.3m x 106.6m
.006" x 72" x 350' .15mm x 1.8m x 106.6m
.006" x 108" x 350' .15mm x 2.7m x 106.6m

Other sizes are available with minimum order requirements.

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.