TECHNICAL DATA
STRETCH-VAC 2000
Soft Co-Extruded Nylon with Ultra High Elongation

DESCRIPTION
STRETCH-VAC 2000 is a red, transparent, soft, high-elongation, heat stabilized, co-extruded, multi layered film, produced from a modified polyamide resin. STRETCH-VACÔ 2000 easily conforms to complex contours. STRETCH-VACÔ 2000 is formulated to be less affected by environmental changes and remain flexible in low humidity conditions.

APPLICATION
STRETCH-VAC 2000 is recommended as a bagging film for advanced composite fabrication, when a dependable, conformable, soft, stretchable bag is required. With STRETCH-VACÔ 2000's unique characteristics, fewer pleats are needed when vacuum bagging either complex or simple contoured parts. The co-extrusion process combines multiple layers of resin flow into film prior to exiting the extrusion die. This process represents the most advanced "state-of-the-art" technology in blown film production. STRETCH-VACÔ 2000 can be heat seamed to meet any custom shape requirements.

MECHANICAL PROPERTIES TYPICAL VALUE
Tensile strength: > 15,000 PSI 1055 kg/cm²
Elongation: > 500%
Tensile modulus: <50,000 PSI

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 205
Melt Point (DSC): 424 / 218

STRETCH-VAC 2000 is available in standard thicknesses of .002" (.051mm) and .003" (.076mm) in a wide variety of sizes in lay-flat tubing, v-sheeting and sheeting.

Call to confirm availability.

Storage and Handling: Recommended use and storage of this product is in RELATIVE humidity environment of 55% OR HIGHER.
VAC-PAK® is a Registered Trademark of Richmond Aircraft Products Inc.
Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.