TECHNICAL DATA
VAC-PAK^® UHT-750 Ultra High Temperature Bagging Film
For Polyimide and Bismaleimide Systems

DESCRIPTION
VAC-PAK^® UHT-750 is an amber colored, transparent, high performance, polyimide bagging film which will withstand 800°F (426°C) cure cycles. VAC-PAK^® UHT-750 does not melt, and resists effects of organic solvents.

APPLICATION
VAC-PAK^® UHT-750 is especially suited as a bag film for polyimide and bismaleimide cure cycles as well as for PEEK and other thermoplastic consolidation cycles.

VAC-PAK^® UHT-750 can also be used in release film applications when treated with suitable release agent. Perforations are available upon request.

MECHANICAL PROPERTIES TYPICAL VALUE
Tensile strength: > 24,000 PSI 1687 kg/cm²
Elongation: > 45%

THERMAL PROPERTIES °F / °C
Maximum use temperature: 800 / 426

VAC-PAK^® UHT-750 is available in sheeting in roll sizes at:
.002"x 60" x 340'
.051mm x 1.52m x 103.6m

VAC-PAK® is a Registered Trademark of Richmond Aircraft Products Inc.
Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.