TECHNICAL DATA
RC 3000-20 AND FR
High Density, High Loft Breather

DESCRIPTION
RC 3000-20 is the same high quality, denier fiber, non-woven polyester felt, as our RC 3000-10 but weighs 20 oz. per sq. yd.

APPLICATION
The multi-directional stretch and low density high loft construction make it an excellent breather choice for complex contour, double curvature details. During autoclave cure cycles, RC 3000-20, used as a breather, will remain open at pressures over 200 PSI (13.8bars) and 400°F (205°C). It is ideally suited for use as an edge breather.

RC 3000-20 is not a release fabric. When used in conjunction with uncured materials, we recommend release film be used against the detail being cured.

RC 3000-20 is non-toxic, non-corrosive, non-dusting and non-allergenic.

SPECIFICATIONS
Maximum use temperature: 400°F 205°C
Weight: 20.0 + 2 oz./yd² 680 + 68 gms/m²
Standard roll size: 60" x 25 yards/roll 1.52m x 91.4m

RC 3000-20 is available up to 120" (3.05m) on special order.
Custom slitting is also available.

RC 3000-20 is also available in "Fire Retardant" (Identify as FR when ordering). FR is recommended for use in non-inert curing atmosphere. RC 3000-20FR meets vertical burn test per F.A.R. Para. 25.853 (B).

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.