TECHNICAL DATA
B 100
Nylon Peel Ply

DESCRIPTION
B 100 is a close weave nylon fabric that has been scoured and heat set. Scouring eliminates contamination from sizing and lubricants used during manufacturing of the fabric, and heat setting reduces the shrinkage of the fabric during the cure cycle.

APPLICATION
B 100 is ideal for use on composite and metal bond assemblies where secondary processing is necessary after the peel ply fabric has been removed. B 100 is not recommended for assemblies that contain phenols. For these types of resin systems, the 60000 series of peel ply fabrics or fiberglass based systems should be used.

PHYSICAL PROPERTIES
Color: natural/white
Weight: 1.7 oz/yd.² 58 g/m²
Thickness: .0045" 117mm
Maximum use temperature: 400°F 205°C

Standard roll size: 58" x 100 yds
1.47m x 92m

This product is available in narrow roll widths by Hot Knife Slitting to eliminate edge fraying.

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.