TECHNICAL DATA
FLASHTAPE 2
High Temperature Pressure Sensitive Silicone Adhesive Polyester Tape

DESCRIPTION
FLASHTAPE 2 is a multipurpose .002" thick, blue translucent polyester film with a .0015" thick fully cured high temperature silicone adhesive.

APPLICATION
FLASHTAPE 2 is designed for use in areas where a thicker, stronger flashtape is required. Like our FLASHTAPE 1, it will release cleanly from most surfaces, with no residue. FLASHTAPE 2 cuts labor costs by allowing easier removal of excess resin and adhesive flash from metal and composite details. It is highly recommended for long term temperature exposure over 350°F (177°C).

PHYSICAL PROPERTIES
Backing: Polyester
Color: Blue, translucent
Adhesive: Fully cured silicone
Thickness: Film: .002" (.051mm) Adhesive: .0015" (.038mm)

MECHANICAL PROPERTIES
Tensile: 50 lbs./in. width, 23Kg/25.4mm width
Adhesion to steel: 315oz./in. width .99kg/25.4mm width
Stretch at break: 100 %

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 204

Flashtape 2 is available in standard roll sizes at:

1" and 2" x 72 yds.
25.4mm and 50.8mm x 65.8m

Other sizes may be available as special order.

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.