TECHNICAL DATA
RAP HOLD 1
High Temperature Double Backed Tape

DESCRIPTION
RAP HOLD 1 is a .001" polyester film coated on both sides with a solvent resistant acrylic adhesive. For use at temperatures up to 400°F (205°C).

APPLICATION
RAPHOLD 1 performs excellent in resin dam hold down, inter-bagging seal or for any place where a two-sided general purpose tape is needed.

PHYSICAL PROPERTIES
Film Substrate: Polyester
Color: Clear
Adhesive: Acrylic
Total Thickness .004" (.l0mm)

MECHANICAL PROPERTIES
Tensile: 25 lbs/in. wide 11.2Kg/ 25.4mm wide
Elongation: 100%
Adhesion: 35 oz/in. width .99Kg/25.4mm wide

Standard size:
1" x 36 yards
25.4mm x 33m

Other widths available upon special order

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.