TECHNICAL DATA
Raphold 10
High Tack Double Backed Hold Down Tape

DESCRIPTION
RAPHOLD 10 is a general purpose, high tack, double backed hold down tape designed for use with honeycomb core and structural foam to hold the work "fast in place" when machining. RAPHOLD 10 is a cloth tape with a two-sided non-silicone rubber adhesive that holds the work firmly and hand peels off after machining, without leaving unwanted residue.

RAPHOLD 10 is also used in pre-fitting of finished parts for final drilling and routing work.

PHYSICAL PROPERTIES
Film Substrate: Cotton cloth
Color: Tan
Adhesive: Rubber
Total Thickness .013" (.33mm)

MECHANICAL PROPERTIES
Tensile: 30 lbs/in. wide 13.6Kg/ 25.4mm wide
Elongation: 100%
Adhesion: 44 oz/in. width 1.25Kg/25.4mm wide

Standard size: 2" x 25 yards
50.8mm x 22.9m

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.