Non-Porous TFE Coated Fiberglass Fabric

DESCRIPTION:

200TFNP is a non-porous TFE-coated plain weave fiberglass cloth release fabric. 200TFNP is resistant to all solvents, adhesives and resin systems normally encountered in composite and metal-bond manufacture. It will contain and release from all commercial resin

APPLICATION:

200TFNP is designed as a release fabric that will prevent resin from bleeding through the release fabric and into the breather fabric. It can be used on metal-bond assemblies to promote filleting of the adhesive flash. 200TFNP is ideal for flat and simple contoured assemblies.

PHYSICAL PROPERTIES:
Color: Tan
Thickness: 0.003 0.076mm
Weight: 3.2 oz/yd.2 109 g/m2
Porosity: ~2 CFM ~.06 CMM
Basic fabric - 1080 fiberglass: 42%
Coating material - TFE: 58%
Maximum use temperature: 550°F 288°C

Standard roll size: 38" x 100 yds. .97m x 91m
Available up to: 80" x 100 yds. 2m x 91m

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.