Porous TFE Coated Fiberglass Fabric

DESCRIPTION:

200TFP is a porous TFE-coated plain weave fiberglass cloth release fabric. 200TFP is resistant to all solvents, adhesives and resin systems normally encountered in composite and metal-bond manufacture. It will release from all commercial resin systems.

APPLICATION:

200TFP is designed as a release fabric that will allow excess resin, volatiles and trapped air to bleed through the release fabric and be absorbed in the bleeder or vented out of the bag through the vacuum vent port. It can be used on metal-bond assemblies to allow the adhesive flash to be bled into the breather and removed from the assembly. 200TFP is ideal for flat and simple contoured assemblies. 200TFP is available in low porosity as Class 1 or medium porosity as Class 2. Please specify when ordering.

PHYSICAL PROPERTIES:
Color: tan

CLASS I
Weight: 1.6-1.9 oz/yd.2 38-45 g/m2
Porosity: 60-120 CFM 1.7-3.4 CMM
Basic fabric - 1080 fiberglass: 80%
Coating material - TFE: 20%
Maximum use temperature: 550°F 288°C

CLASS II
Weight: 1.8-2.1 oz/yd.2 43-50 grm/m2
Porosity: 20-60 CFM .56-1.7 CMM
Basic fabric - 1080 fiberglass: 72%
Coating material - TFE: 28%
Maximum use temperature: 550°F 288°C

Standard roll size: 38" x 100 yds. .97m x 91m
Available up to: 80" x 100 yds. 2m x 91m

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.