TECHNICAL DATA
E3760 Release Film
Clear Translucent and White Halohydrocarbon Polymer Release Films, Plain and Perforated

DESCRIPTION
E3760 is a clear translucent, or white colored release film suitable for use with all commonly used resin systems up to 400°F (204°C).

APPLICATION
E3760 is an excellent release film for mild contour and flat parts as the hand of this film allows for flat lay out and smooth with little wrinkling issues as experienced with other more pliable release films. E3760 is an economical alternative to our higher elongation, higher temperature release films, for these applications.
E3760 is available non-perforated or in perforations shown in Table I in this section of our catalog.

MECHANICAL PROPERTIES TYPICAL VALUE
Tensile strength: > 10,000 PSI 703 kg/cm²
Elongation: > 200%
Yield: 139 ft²/lb/mil 28.38m²/kg/25µTensile strength: > 6000 PSI 422 kg/cm²

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 205

E3760 clear or white is available in standard roll sizes at:

.001" x 54" x 3000'
.025mm x 1.37m x 914m
.001" x 64" x 1650'
.025mm x 1.63m x 503m
.001" x 72" x 1650'
.025mm x 1.83m x 503m
.002" x 54" x 1500'
.051mm x 1.37m x 457m
.002" x 72" x 825'
.051mm x 1.83m x 251

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.