TECHNICAL DATA
E 2760 Release Film
Co-Polymer Medium Temperature, High Elongation Release Film

DESCRIPTION
E 2760 is a red tinted, co-polymer, high elongation, low temperature release film with excellent conformability.

APPLICATION
E 2760 is an excellent release film for use on highly contoured parts for cure temperatures up to 250ºF.
E 2760 offers good release properties in the curing temperature range of most polyesters, vinylesters, phenolic and some epoxy, as well as other applications where release films are required. The colored film provides for easy identification and removal from parts.

E 2760 is available non-perforated or in the perforated. Please call for available perforations.

MECHANICAL PROPERTIES TYPICAL VALUE
Tensile modulus: < 2000
Elongation: > 800%

THERMAL PROPERTIES °F / °C
Maximum use temperature: 250 / 121
Melt point (DSC): 318 / 159

E 2760 is available as sheeting in standard roll sizes at:

.002" x 60" x 1000'
.051mm x 1.52m x 304.8

Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.