TECHNICAL DATA
VAC-PAK^® E4760 Release Film
Modified Polymer Release Films

DESCRIPTION
VAC-PAK^® E4760 is a clear or blue tinted, modified polymer release film providing excellent release capabilities from epoxy, phenolic, polyester and other resin systems up to 400°F (205°C).

APPLICATION
VAC-PAK^® E4760 is specifically applicable to mild contours and flat panel applications. With 300%+ elongation and 400°F (205°) capabilities, VAC-PAK^® E4760 is an economical alternative to our higher elongation, higher temperature use release films.
Release without contamination from phenolic, epoxies, and polyesters.

VAC PAK^® E4760 is available non-perforated or in the perforations shown in Table I in this section of our catalog.

MECHANICAL PROPERTIES TYPICAL VALUE
Elongation: > 300%
Yield: 116 ft²/lb/mil 23.7m²/kg/25µ

THERMAL PROPERTIES °F / °C
Maximum use temperature: 400 / 205
Melt point (DSC): 430 / 221

VAC PAK^® E4760 is available in standard roll sizes at:

.0015" x 54" x 1800'
.038mm x 1.37m x 549m
.0015" x 60" x 1251'
.038mm x 1.52m x 381m
.002" x 54" x 1500'
.051 mm x 1.37m x 457m
.002" x 60" x 1800'
.051mm x 1.52m x 549m
.002" x 72" x 825'
.051 mm x 1.83m X 252m

VAC-PAK® is a Registered Trademark of Richmond Aircraft Products Inc.
Note: Data provided is for information only and does not constitute any warranty for the product. As the conditions and varying methods of use are beyond our control, Richmond Aircraft Products, Inc. shall not be liable for any special, indirect, incidental, or consequential damages, including without limitation, lost revenues or lost profits, which may result from the use, or inability to use these materials. These materials are provided "as is" without warranty of any kind, either expressed or implied, including, but not limited to the implied warranties of merchantability or fitness for a particular purpose.